Depth Setting Gauge
The USP states that the bottom of the basket/paddle is 25mm ± 2mm above the bottom of the vessel.
Height is important to ensure reproducible media hydrodynamics. Incorrectly set paddle heights can cause both low and high readings.
LabHut offers several options for depth setting gauges, as shown below, for measuring this parameter.
-
Ball Style Depth Setting Tool for Paddles and Baskets
Ball Style Depth Setting Tool for Paddles and Baskets. 25mm Certified Ball.
-
Digital Depth Gauge Assembly for USP and ASTM Height Measurement
Digital Depth Gauge Assembly. Accurately measures paddle or basket height in the vessel.
Works with all Distek baths, Hanson (Vision requires adapter) and Vankel except V-series. Contact us if you have a different bath.
-
Stationary Basket Spacer, 1cm
Stationary Basket Spacer, 1cm. For setting the correct height of the basket above the paddle
-
Depth Setting Gauge - Hanson Style
Depth Set Gauge - Hanson style. Simply fit the groove against the paddle or basket shaft and place in the bottom of the vessel. Certified
OEM Part# 91-902-048
-
Go-No Go Gauge for Checking Depth Settings
Go/No Go Depth Check Tool - Simply fit the tool under the basket or paddle. The 'Go' end should move underneath. The 'No Go' end should not. A simple and quick confirmation that the height is correctly set for each dissolution test.
-
Ball Style Depth Setting Tool for Small Volumes
Ball Style Depth Setting Tool for Small Volumes. 10mm and 15mm Depth.
-
25 mm Calibrated Ball for ASTM Height Validation/Setting; Serialized
25 mm Calibrated Ball for ASTM Height Validation/Setting; Serialized.