Home › Product Range › Sampling Cannulae & Stoppers › Sampling for Hanson « Back a Page

Sampling for Hanson

Also suitable for Erweka, Pharmatest and Caleva

Sampling Cannulae are used to take samples from the dissolution test. Choice of cannula is important as the sampling method must not adversely affect the accuracy of the test causing erroneous results.

All QLA Products are manufactured to ISO9001 quality standards.

4.75” (120mm) Bent PEEK Sampling Cannula with Luer Adapter for 900ml Sampling 1/8” (3.2mm) Diameter Hanson Research Compatible

Part Number	Pack Size	Enquire
CAN475-PH	Each

Bent Cannula with Luer Adapter for 900ml Manual Sampling

7.75” (195mm) Bent SS Sampling Cannula with Luer Adapter for 500ml Sampling 1/8” (3.2mm) Diameter Hanson Research Compatible

7.75” (195mm) Bent SS Sampling Cannula with Luer Adapter for 500ml Sampling 1/8” (3.2mm) Diameter Hanson Research / Erweka Compatible

Part Number	Pack Size	Enquire
CAN775-SH	Each

Bent Cannula with Luer Adapter for 500ml Manual Sampling

7.75” (195mm) Bent SS Sampling Cannula with Luer Adapter and Permenent Tip Hanson Research Compatible

Part Number	Pack Size	Enquire
CAN775-HR	Each

Bent Cannula with Luer Adapter and Permanent Tip. Thin sample cannulae with steel tip to take standard Hanson filters.

15” (380mm) Bent SS Sampling Cannula with Luer Adapter Through Head Mount 1/8” (3.2mm) Diameter - Hanson Research Compatible

15” (380mm) Bent SS Sampling Cannula with Luer Adapter Through Head Mount 1/8” (3.2mm) Diameter - Hanson Research / Erweka Compatible

Part Number	Pack Size	Enquire
CAN015-SH	Each

Bent Cannula with Luer Adapter Through Head Mount

7.75” (195mm) Bent PEEK Sampling Cannula with Luer Adapter for 500ml Sampling 1/8” (3.2mm) Diameter Hanson Research Compatible

Part Number	Pack Size	Enquire
CAN775-PH	Each

Bent Cannula with Luer Adapter for 500ml Manual Sampling

Adjustable Cannula Stopper with Thumb-Screw Tightening.

Part Number	Pack Size	Enquire
CANSTP-HR	Each

Adjustable Cannula Stopper with thumb-screw adjustment to set cannula height.

15” (380mm) Bent PEEK Sampling Cannula with Luer Adapter Through Head Mount 1/8” (3.2mm) Diameter Hanson Research Compatible

15 inch (380mm) bent PEEK sampling cannula with luer adapter Hanson Research compatible

Part Number	Pack Size	Enquire
CAN015-PH	Each

Bent Cannula with Luer Adapter Through Head Mount

4.75” (120mm) Bent SS Sampling Cannula with Luer Adapter for 900ml Sampling 1/8” (3.2mm) Diameter Hanson Research Compatible

4.75” (120mm) Bent SS Sampling Cannula with Luer Adapter for 900ml Sampling 1/8” (3.2mm) Diameter Hanson Research / Erweka Compatible

Part Number	Pack Size	Enquire
CAN475-SH	Each

Bent Cannula with Luer Adapter for 900ml Manual Sampling

4.75” (120mm) Bent SS Sampling Cannula with Luer Adapter and Permenent Tip Hanson Research Compatible

4.75” (120mm) Bent SS Sampling Cannula with Luer Adapter and Permanent Tip Hanson Compatible

Part Number	Pack Size	Enquire
CAN475-HR	Each

Bent Cannula with Luer Adapter and Permanent Tip. Thin sample cannulae with steel tip to take standard Hanson filters.

15” (380mm) Straight PEEK Sampling Cannula with Luer Adapter 1/8” (3.2mm) Diameter Hanson Research Compatible

15” (380mm) Straight PEEK Sampling Cannula Hanson Research Compatible

Part Number	Pack Size	Enquire
CANS15-PH	Each

Straight Cannula with Luer Adapter

Top Tips

Sampling Position

The USP defines the sampling position as:

''A zone half way between the top of the media and top of the paddle or basket, not less than 1cm from the vessel wall.''

It should be noted that the sampling position is different for 500ml and 900ml tests.

Quick Links