Chromatography and Dissolution Accessories suppliers

Model B2300 Binary Pump 0.001-5ml/min. 6000psi.

Part Number Material Price Qty Buy
B05SFD01 Stainless Steel
£6,611.49
B05PFD01 PEEK
£6,611.49

Model B2300 Binary Pump self-flush 0.001-5ml/min, 6000psi PEEK110/220V. Requires SCU470 Controller for Gradient operation.

Meets the Most Demanding Applications

The B2300 series consists of two high-performance pumps, dual pulse dampers, and an offline pressure transducer.

Reduced Maintenance

Seal life is dramatically extended by actively flushing the back of the primary seal with a flushing solution. The result is less down-time and reduced operating expenses. The self-flush is automatic—just change the flushing fluid weekly. Seals can be changed in five minutes without tools.

New Easy Prime Heads

The B2300 Pump features a head design with the prime purge valve integrated into each fluid path. This insures the solvent is drawn from the reservoir even if the other pump is running.

Flexibility in Control

Binary gradient programming can be accomplished by a hand-held keypad unit, or by EZChrom SI data acquisition software.

Performance and Reliability Beyond its Price

The use of digital stepper motor technology and the proven single-piston design gives the performance of the most expensive pumps at a fraction of their cost. The operating cost is lower too, due to the simplicity of the design and fewer number of parts required. It’s so reliable it carries a three-year warranty.

Reproducibility You Can Count On

The B2300 Pump gives reproducible gradients and chromatography due to its pulse free low volume fluid path.
The result of this simplicity and low dead volume is reproducibility that is seen in the chromatographic performance.

Pump features:

  • Fast & easy setup — 2 inlet connections from solvent reservoirs, outlet connection to injector
  • Modular — can be added to any system
  • All stainless or PEEK fluid path (pumps, valves, and fittings)
  • Self-flushing pump heads for extended seal life and reduced maintenance
  • Overpressure system shutdown to protect LC column 
  • asily user-adjusted process set points (flow rate, pressure) via front keypads
  • Digital readout of process parameters User-settable upper/lower pressure limits
  • RS-232 interface
  • USB Connectivity (integrated USB to RS-232 Solution
  • Compact size — 11 inches wide
  • .001-5 mL/min or .01-10 mL/min flow ranges
Flow Rate
0.001-5 mL/min., 0.01-10 mL/min
Max. Pressure
6,000 psi (Stainless Steel), 5,000 psi (PEEK)
Pressure Zero Offset
±2 psi
Pressure Accuracy
±1% of full-scale pressure
Flow Accuracy
±2% at flow rate of .2 mL/min. and above
Flow Precision
0.2% RSD
Controls
RS-232 
Dimensions
 8.7” H x 10.5” W x 18” D (22.1 x 26.7 x 45.7 cm)
Weight 24 pounds (11 kg)
Pack Size 1
Pump Flow Rate 0.001-5.0ml